Element: |
Fixed-charge back plate permanently polarized condenser |
Polar Pattern:
|
Omnidirectional in hemisphere above mounting surface |
Frequency Response:
|
30-20,000 Hz |
Low Frequency Roll-Off: |
80 Hz, 18 dB/octave |
Open Circuit Sensitivity:
|
Phantom: -39 dB (11.2 mV) re 1V at 1 Pa Battery: -40 dB (10.0 mV) re 1V at 1 Pa |
Impedance: |
Phantom: 200 ohms Battery: 270 ohms |
Maximum Input Sound Level: |
Phantom: 132 dB, 1 kHz at 1% T.H.D. Battery: 122 dB SPL, 1 kHz at 1% T.H.D.
|
Dynamic Range (typical): |
Phantom: 111 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL |
Signal-To-Noise Ratio: |
73 dB, 1 kHz at 1 Pa |
Phantom Power Requirements: |
11-52V DC, 2 mA typical |
Battery Type:
|
1.5V AA/UM3 |
Battery Current / Life: |
0.4 mA / 1200 hours typical (alkaline) |
Switch: |
Off, on-flat, on-roll-off |
Weight (Microphone): |
2.8 oz (78 g) |
Weight (Power Module): |
4.9 oz (139 g) |
Dimensions (Microphone): |
2.56" (65.0 mm) diameter, 0.59" (15.1 mm) height |
Dimensions (Power Module): |
3.31" (84.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D |
Output Connector (Power Module): |
Integral 3-pin XLRM-type |
Cable: |
25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |