Prices shown in CAD

Sales

Radio Labs EZ-MPA2 Dual Microphone Pre-Amplifier - Stereo Output

Radio Labs EZ-MPA2 Dual Microphone Pre-Amplifier - Stereo Output

The EZ-MPA2 is a stereo microphone preamplifier with front-panel volume controls and audio level metering. A front-panel switch engages audio compressors to control overloads and clipping during high level audio bursts or peaks from the microphones. Dynamic or condenser microphones are both supported with rear-panel switchable phantom voltage. The line output is available on RCA or MINI jacks. Left and right channel LED VU metering facilitates easy level adjustment. The EZ-MPA2 is ideal to add microphone inputs to mixers and amplifiers with line inputs. It is designed for ideal use in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, studios and as part of commercial sound systems.

Your Price: Call for pricing CAD

Quantity:

Features
Specifications
Accessories

Left and Right Balanced XLR Microphone Inputs
Switch-Selectable Phantom on Rear Panel
Unbalanced Output on MINI or RCA Jacks
Input and Output Connections on Rear Panel
Front-Panel Compressor Enable/Disable Switch
Audio Compressors Control Overloads
Front-Panel LEVEL Control for Each Channel
Dual-LED VU Meter for Each Channel

Optimized for Dynamic or Condenser Mics
Headroom Accomodates High Input Levels
Headroom Increases with Lower Gain Settings
Compressor Limits Clipping Over Wide Dynamic Range

Inputs (2):

1.2 kΩ balanced on XLR jack, mic-level, -11 dBu max.

Level controls (2):

Off to 50 dB gain for each input

Outputs (2):

-10 dBV nominal on RCA jacks or Mini jack, +16 dBV max. without compression, -4 dBV max. with 20 dB compression

Frequency Response:

80 Hz to 40 kHz (±1 dB, mic input, -6 dB at 20 Hz with integral high-pass filter)

THD+N:

< 0.1% (35 Hz to 20 kHz, -50 dBu input)

Compression:

20 dB range, switch-selectable

Crosstalk:

Below noise floor (1 kHz)

CMRR:

> 55 dB (20 to 20 kHz)

Metering:

Dual-LED VU Meter for Left and Right, calibrated to -10 dBV output

Phantom:

Switch-selectable 24 V (IEC 1938: 1996-12)

Noise:

< -65 dB (below -10 dBV output, -50 dBu input)

24 Vdc power supply current:

65 mA (idle), 90 mA (max.), 110 mA (max. with phantom)

Case dimensions:

5.75” (14.6 cm)W x 3” (7.6 cm)D

Mounting size:

1/3 rack width

Not Available

Review this item